k8娱乐平台

EN CN

Home / Products / Crushing & sizing

Impact Crusher

Impact crusher is particularly used for primary and secondary crushing of medium /low-hardness material, whose compressive strength is up to 250MPa, such as raw gypsum, hard coal, limestone, shale, petrocoke and etc. for mining and pit and quarry industries.

Impact crusher is distinguished itself from others with the following advantages:

High reduction ratio from 20 up to 150, leading to simple process flow by reducing crushing stages;

Even size and cubical shape of final product owing to the increased number of crushing chamber;

High capacity and large feed size, resulting from bigger crushing chamber and higher rotor speed;

Low operating cost due to the low energy consumption and metallic wear.

Working Principle

After entering the crushing chamber of impact crusher, the feed material is struck by the high-velocity plate hammers on the rotor, and the crushed material is flying off at a tangent against the breaker plates at the other end of the crushing chamber to be crushed again. Then it is rebound to plate hammers and the above course continues repeatedly. With  strike by plate hammers, impact with breaker plates and inter-collision, the material is keeping cracked and smashed. While the particle size is smaller than the gap between breaker plate and plate hammer, the sized material is discharged out of the impact crusher.

Product Features

    Impact crusher mainly consists of drive unit, rotor, curtain, adustment mechanism and housing.

  • Drive unit

    There are two options: belt drive and direct drive. When the driving power is high, a direct drive with fluid coupling is preferred.

  • Rotor

    The rotor of ANDE impact crusher is characterized by large-diameter and robust fabricated steel cast, which guarantee high inertia required for reliable crushing performance. The rotor is further strengthened with a chrome alloy forged shaft. In some cases a double-rotor impact crusher is employed as series application of two crushers for high reduction ratio and simple process flow.


  • Hammer

    The mass and banana shape are critical to the design of plate hammer, leading to more effective shearing and collision of feeding material and thus improved production. With the two-edge design, the plate hammer can be turned round to maximize use life. The heavy duty backing plates and hammer lock wedges stably hold plate hammers both vertically and horizontally by giving solid abutment positioning and maintaining rigidity during operation.


  • Curtain

    According to the product size, 2 or 3 heavy curtains are provided inside the housing to form the crushing chamber. Mounted on pivoting shaft, each of them is separately adjustable. The curtain is furbished with wear liners, made of high manganese alloy steel cast with modular design.

  • Curtain adjustment mechanism

    The gap between rotor and curtain can be adjusted to optimize performance. Presently the electrically operated hydraulic system makes the adjustment as well as frame opening much easier.

Technical Specification

Type No.

PF-1013

PF-1214

PF-1315

PF-1320

Rotor diameter(mm)

1000

1250

1300

1300

Rotor width(mm)

1300

1400

1500

2000

Feed size(mm)

250

300

350

350

Capacity(t/h)

50-120

80-180

100-250

200-350

Power(kw)

110-185

132-200

180-315

300-400

Type No.

PF-1622

PF-1822

PF-1638

PF-1838

Rotor diameter(mm)

1600

1800

1600

1800

Rotor width(mm)

2200

2200

3800

3800

Feed size(mm)

400

500

800

1000

Capacity(t/h)

400-600

500-800

800-1000

1000-1200

Power(kw)

450-560

560-710

850-1120

950-1250

Performance
Solution to crushing & sizing equipment and system
Stay updated on your industry k8娱乐平台:GET NEWSLETTER
Contact

Future Square, No.55 Industrial South Road, High-tech Zone, Jinan, China

+86-0531-83323931
huangfan@crowdunderpressure.com

© 2020 ANDE Metallurgical Machinery Equipment Co., Ltd All rights reserved

Follow us

Attention to the official account of Ande metallurgy WeChat